The quality of the process of feeding and applying a particular material depends not only on the quality of the equipment, but also on a deep understanding of the technology of its use and correct use for different types of applications..

The company "Media Engineering" LLC pays special attention to both the selection of the necessary equipment for solving the task, and the selection of the ideal solution for each client.

LLC "Media Engineering" has been specializing in the supply of equipment for the application of heated adhesives and sealants for more than 8 years.

This equipment is a system consisting of a pump or tandem of pumps, a control unit, hoses, pressure regulators and an application applicator itself.

All equipment is equipped with heating elements to maintain the required temperature of the material; heating of the system elements can be performed up to 200 ° C, depending on the type of material used.

To ensure a continuous production process, a tandem feed station is designed and installed. The tandem station consists of two pumps and a switching system between them.

In automatic mode, the tandem system of two pumps switches to a full barrel as soon as the first one is empty.

This equipment can handle with wide range of materials:

  • Butyl rubber

  • Epoxy materials

  • Ethylene-Vinyl-Acetate (EVA)

  • Polyamide

  • chemically active polyurethane (PUR)

  • Contact adhesive (PSA)

  • Polyisobutylene (PIB)

  • Polymer mixtures

  • Heated sealants

Media Engineering LLC has extensive experience in the design and manufacture of both manual and automatic systems for the supply and application of heated and hot-melt sealants, as well as adhesives.